Name: 4 Function Replacement 110V Receiver | 9 Series
Brand: Lodar LTD
SKU: 9604RX-8
Price: 526.00 USD
Availability: InStock

The Lodar LTD 4 Function 110V Replacement Relay Receiver, part of the 96 Series, features a transparent enclosure that encases a green circuit board with various components, all securely mounted within a black base. It is ideal for integration into 96 Series Systems as a replacement receiver for setups operating at 110V.

4 Function Replacement 110V Receiver | 9 Series

$526.00

4 Function Replacement 110V Receiver | 9 Series

9604RX-8

$526.00

Out of Stock

This is a replacement 110V Relay receiver for Lodar 9 Series wireless control systems — 4-function, 110V/220V AC relay output switching rated to 10 A per output. The receiver mounts on the equipment, receives the signal from the transmitter, and switches the output functions. Includes a master output — an additional output that fires on every function: once wired in, it energizes whenever any function is operated, for equipment that must run in conjunction with the controls (a hydraulic power unit running while a lift function operates, a safety light while winching).

Replacement part for an existing Lodar 9 Series wireless system — a receiver is not a standalone product. It pairs with a matching transmitter on the same series and function count.

When do I need the 110V receiver?

For Lodar wireless systems running on 110V or 220V AC rather than 12/24V DC — shop and dock installations on building power. It's a 10 A relay receiver and is not interchangeable with the 12/24V DC receivers; match the receiver to the system voltage.

4-function 110V Relay receiver
For Lodar 9 Series wireless control systems
Master output — an additional output that fires on every function
Relay output switching · 10 A · 110V/220V AC (90–264 VAC) · Wide Band
Lodar SKU 9604RX-8

Match the trailing code. Lodar 9 Series transmitters and receivers carry a trailing match number. Check the unit you are replacing: no number means -8, the most common code we carry, and some systems use -3. If your existing system or part is coded anything other than -8, contact us so we send the correct unit.

This is a replacement part — it goes on the 4-function 9 Series wireless system. See the complete 4 Function IP Wireless Control System or 4 Function Standard Wireless Control System or 4 Function Mini Wireless Control System. Pair it with the matching 4 Function transmitter on the same system.

Electrician Required

A certified electrician is required to install this product. Do not attempt to install without the proper certifications and training. Severe injury or death can result when working with 110V AC Power.

Lodar 5 Year Pro-rated Warranty

Warranty is pro-rated and guarantees that product will be free of defect and faults from the manufacturer. See Lodar terms and conditions for more details.

Functions

Operating Voltage

110 Volts AC

Receiver IP Rating

IP 65

Operating Distance

150 ft. (45 m.)

Master Output

Yes

Max Amps

Series

9000 Series

Type

Receiver Only

Wiring Included

None

Warranty

Lodar 5 Year Pro-rated Warranty

5 Year Pro-Rated Warranty

For the first 2 years Warranty is unlimited.

During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

For the following 3 years Warranty is pro-rated.

During that period, your Distributor will replace with a new product at a discounted price.
These prices are set by each Distributor.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

Conditions

We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
Lodar 8000 Series are now totally out of warranty and are not covered.
Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.

5 Year Pro-Rated Warranty

For the first 2 years Warranty is unlimited.

During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

For the following 3 years Warranty is pro-rated.

During that period, your Distributor will replace with a new product at a discounted price.
These prices are set by each Distributor.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

Conditions

We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
Lodar 8000 Series are now totally out of warranty and are not covered.
Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.