10,000 lb Hydraulic Recovery Winch [PSHV10000]
1 / 7
10,000 lb Hydraulic Recovery Winch | 46 fpm
PSHV10000
$1,582.00
Item Already in Cart
This item is already in your cart with a different configuration. Would you like to replace it or add a new one?
Out of Stock
The PSHV10000 is the fastest winch in the Pierce hydraulic recovery line — 46 fpm at 15.9 GPM, more than 50% faster than any other hydraulic in the lineup. 10,000 lb pulling capacity from a 5.9 in³ motor at 2,175 PSI, with a 2-stage planetary gearset and rotating ring-gear clutch for free-spool payout.
When does the 10K hydraulic make sense?
Light- to medium-duty recovery jobs where speed matters more than maximum capacity — light tow trucks, off-road recovery rigs, service trucks pulling stuck vehicles. The 46 fpm line speed cuts cycle time on every recovery. Free-spool is a manual operation at the winch (rotating ring-gear lever) — simpler than the air-spool clutch on the heavy-duty PSHDH line, with no onboard air supply required.
- 10,000 lb rated pulling capacity
- Hydraulic, 5.9 in³ in/rev motor
- 2,175 PSI operational pressure, 15.9 GPM max oil flow
- 2-stage planetary gear, 16:1 ratio
- 46 fpm max line speed at 15.9 GPM (fastest in the Pierce hydraulic line)
- Rotating ring-gear clutch — manual engagement at the winch, no air supply required
- Spring-applied drag brake with over-center valve
- Aluminum die-cast housings with steel drum
- Pierce SKU PSHV10000 — typically in stock, fast turnaround
For more pulling capacity at the next step up, see the 15,000 lb Hydraulic Recovery Winch. For continuous-duty industrial pulling (not recovery), see the 9,000 lb Hydraulic Worm Gear Winch in the worm-gear industrial line.
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
WARNING
This Winch is not intended or designed to transport people. Do not use winch to hold a load during transportation
PIERCE 1 Year Warranty
Warranty guarantees that all parts will be free of defects from the manufacturer. See details for terms and conditions.
What's Included
Specifications
Max Capacity (lbs.)
10000
Series
Recovery
Max Line Speed
46 fpm @ 15.9 gpm
Max Oil Flow (gpm)
15.90
Operational Pressure (psi)
2175
Hydraulic Motor
5.9 in³ / rev
Gear Type
2-Stage Planetary Gear
Gear Ratio
16:1
Construction
Aluminum Die Cast Housings with Steel Drum
Drum Rotation
Counter-Clockwise (Underwound)
Clutch Type
Rotating Ring Gear
Brake Type
Spring Applied Drag Brake together with Over-Center Valve Supplied
Warranty
Resources
FAQs (8)
What precautions should I take when pulling heavy loads?
Place a heavy blanket, jacket, or winch dampener over the wire rope during heavy pulls. If the rope snaps, the cloth can help absorb energy and reduce dangerous backlash. Ensure the item is thick, secure, and placed midway along the taut rope. This simple step protects you and others nearby during tasks like vehicle recovery or heavy towing.
How can I provide a safe anchor point while winching?
Use a D-ring or bow shackle rated for your winch’s pulling capacity with a tree trunk protector or similar anchor strap. Select a sturdy anchor like a healthy tree or vehicle tow point. Wrap the protector around the anchor, attach the shackle, and connect the winch cable. Ensure all gear is rated for the load and check connections before winching. This prevents equipment failure or injury during tasks like vehicle recovery.
How can I double my winch pulling capacity?
You can double your winch’s pulling capacity by using a snatch block, which is a pulley system that redirects the winch cable. Here’s how it works: Attach the snatch block to the load or a secure anchor point, then run the winch cable through the pulley and back to a fixed point, like the tow hook on your vehicle. This setup effectively halves the load on the winch by distributing it across two cable lines, allowing it to pull twice as much weight.
How much pulling power do I need from my winch?
Choose a winch with a pulling capacity at least 1.5 times your vehicle’s gross weight to handle obstacles like mud, snow, sand, water, or steep hills. For example, a 6,000-pound vehicle needs a winch rated for at least 9,000 pounds. This ensures enough power for safe recovery in tough conditions without overloading the winch.
How do I secure a load with my winch?
Use ratchet straps or tie-downs to secure a load safely. Winches are not suitable for tying down loads, as constant movement or vibration can damage their gears. Choose high-quality ratchet straps rated for the load’s weight and attach them to secure anchor points on your vehicle or trailer. Check straps for wear and ensure they’re tight to prevent shifting during transport.
What maintenance is required on my winch?
Regular maintenance extends your winch’s life. Lubricate all grease points, tighten bolts, and inspect electrical connections, especially at the battery, for corrosion or loose fittings. Check the wire rope for wear, flat spots, or broken strands; replace if damaged. Refer to your winch manual for specific checks. Routine care prevents breakdowns and ensures safe operation during tasks like vehicle recovery.
How do I re-spool the wire rope onto my winch?
Always wear leather gloves when re-spooling wire rope to protect your hands. Never use bare hands, as the rope can cause cuts or burns. Keep a slight load on the rope to spool it evenly. Guide the rope with one gloved hand while using the remote control in the other to operate the winch. This ensures safe, tight spooling for effective winching.
What should I do about my vehicles wheels while winching?
Place wheel chocks or sturdy blocks under your vehicle’s wheels before winching. This prevents the vehicle from rolling forward or backward, keeping it stable and safe during the pull. Use solid materials like wood, rubber chocks, or stones, and position them snugly against the tires. This is especially important on slopes or loose terrain during tasks like vehicle recovery.
Warranty
Reviews (2)
5 out of 5 based on 2 reviews
- 5 2
- 4 0
- 3 0
- 2 0
- 1 0
-
-
Winch
I think this is a great winch and built to last!