Pierce 18k winch
Awesome customer service and accommodated well when I decided to send a guy to their office instead of having it shipped!! Very happy repeat customer.
1 / 9
18,000 lb Hydraulic Recovery Winch | 23 fpm
PSHV18000
$2,075.00
Item Already in Cart
This item is already in your cart with a different configuration. Would you like to replace it or add a new one?
The PSHV18000 is the top of the Pierce HV hydraulic recovery line — 18,000 lb pulling capacity from a 9.5 in³ motor at 2,175 PSI. Same motor displacement as the heavier-duty PSHDH 20K, but with the simpler rotating ring-gear clutch and die-cast housings of the HV series. 23 fpm line speed.
How is the PSHV18000 different from the PSHDH20000?
Same 9.5 in³ hydraulic motor, but the PSHV18000 uses a rotating ring-gear clutch (free-spool by lever, no air supply needed) where the PSHDH 20K uses an output-shaft disengaged clutch (manual or air-spool variants). The PSHV is the lighter-duty, simpler, more compact answer; the PSHDH is the heavier-duty, more configurable answer for wrecker bodies and service rigs.
- 18,000 lb rated pulling capacity
- Hydraulic, 9.5 in³ in/rev motor
- 15.9 GPM max oil flow
- 2-stage planetary gear, 19.4:1 ratio
- 23 fpm max line speed
- Rotating ring-gear clutch — manual engagement at the winch, no air supply required
- Aluminum die-cast housings with steel drum
- Recommended wire rope: ½ in × 165 ft
- Pierce SKU PSHV18000 — typically in stock, fast turnaround
For lighter pulling at higher line speed, see the 15,000 lb Hydraulic Recovery Winch. For the same motor in a heavier-duty PSHDH frame with output-shaft clutch, see the 20,000 lb Hydraulic Recovery Winch (Long Drum, Manual) or 20,000 lb Hydraulic Recovery Winch (Narrow Drum, Air).
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
WARNING
This Winch is not intended or designed to transport people. Do not use winch to hold a load during transportation
PIERCE 1 Year Warranty
Warranty guarantees that all parts will be free of defects from the manufacturer. See details for terms and conditions.
What's Included
Specifications
Max Capacity (lbs.)
18000
NMFC
116440-01
Power Source
Hydraulic
Series
Recovery
Max Line Speed
23 fpm @ 15.9 gpm
Max Oil Flow (gpm)
15.90
Hydraulic Motor
9.5 in³ / rev
Gear Type
2-Stage Planetary Gear
Gear Ratio
19.4:1
Construction
Aluminum Die Cast Housings with Steel Drum
Drum Rotation
Counter-Clockwise (Underwound)
Recommended Wire Rope
½" x 165'
Clutch Type
Rotating Ring Gear
Warranty
FAQs (8)
What precautions should I take when pulling heavy loads?
Place a heavy blanket, jacket, or winch dampener over the wire rope during heavy pulls. If the rope snaps, the cloth can help absorb energy and reduce dangerous backlash. Ensure the item is thick, secure, and placed midway along the taut rope. This simple step protects you and others nearby during tasks like vehicle recovery or heavy towing.
How can I provide a safe anchor point while winching?
Use a D-ring or bow shackle rated for your winch’s pulling capacity with a tree trunk protector or similar anchor strap. Select a sturdy anchor like a healthy tree or vehicle tow point. Wrap the protector around the anchor, attach the shackle, and connect the winch cable. Ensure all gear is rated for the load and check connections before winching. This prevents equipment failure or injury during tasks like vehicle recovery.
How can I double my winch pulling capacity?
You can double your winch’s pulling capacity by using a snatch block, which is a pulley system that redirects the winch cable. Here’s how it works: Attach the snatch block to the load or a secure anchor point, then run the winch cable through the pulley and back to a fixed point, like the tow hook on your vehicle. This setup effectively halves the load on the winch by distributing it across two cable lines, allowing it to pull twice as much weight.
How much pulling power do I need from my winch?
Choose a winch with a pulling capacity at least 1.5 times your vehicle’s gross weight to handle obstacles like mud, snow, sand, water, or steep hills. For example, a 6,000-pound vehicle needs a winch rated for at least 9,000 pounds. This ensures enough power for safe recovery in tough conditions without overloading the winch.
How do I secure a load with my winch?
Use ratchet straps or tie-downs to secure a load safely. Winches are not suitable for tying down loads, as constant movement or vibration can damage their gears. Choose high-quality ratchet straps rated for the load’s weight and attach them to secure anchor points on your vehicle or trailer. Check straps for wear and ensure they’re tight to prevent shifting during transport.
What maintenance is required on my winch?
Regular maintenance extends your winch’s life. Lubricate all grease points, tighten bolts, and inspect electrical connections, especially at the battery, for corrosion or loose fittings. Check the wire rope for wear, flat spots, or broken strands; replace if damaged. Refer to your winch manual for specific checks. Routine care prevents breakdowns and ensures safe operation during tasks like vehicle recovery.
How do I re-spool the wire rope onto my winch?
Always wear leather gloves when re-spooling wire rope to protect your hands. Never use bare hands, as the rope can cause cuts or burns. Keep a slight load on the rope to spool it evenly. Guide the rope with one gloved hand while using the remote control in the other to operate the winch. This ensures safe, tight spooling for effective winching.
What should I do about my vehicles wheels while winching?
Place wheel chocks or sturdy blocks under your vehicle’s wheels before winching. This prevents the vehicle from rolling forward or backward, keeping it stable and safe during the pull. Use solid materials like wood, rubber chocks, or stones, and position them snugly against the tires. This is especially important on slopes or loose terrain during tasks like vehicle recovery.
Warranty
Reviews (1)
5 out of 5 based on 1 reviews
- 5 1
- 4 0
- 3 0
- 2 0
- 1 0