Hydraulic Winches
Marine operations demand high-capacity hydraulic winches for hauling boats onto trailers at ramps, pulling vessels in and out of dry dock, positioning barges, and anchoring in commercial operations. Hydraulic drive provides the sustained, high-load pulling power that marine environments demand — salt water, continuous duty, and loads that shift unpredictably as boats come out of the water. The range from 10,000 to 50,000 lbs covers everything from large recreational boat ramps to commercial marine yards. The narrow drum option fits tighter transoms and mounting spaces on marine trailers.
30,000 lb Hydraulic Recovery Winch | Narrow Drum, Air
Thirty-thousand pound narrow drum hydraulic winch. The narrow configuration fits tighter transoms and mounting spaces on marine trailers.
20,000 lb Hydraulic Recovery Winch | Long Drum, Manual
Hydraulic winch for larger recreational and light commercial vessel hauling. Handles the heavier boats that exceed what lighter winch setups can pull safely.
18,000 lb Hydraulic Recovery Winch | 23 fpm
Mid-range hydraulic winch for marina and boatyard applications — hauling medium-size boats onto trailers and pulling vessels through maintenance bays.
15,000 lb Hydraulic Recovery Winch | 30 fpm
Hydraulic winch for the mid-range of recreational and small commercial vessel hauling.
10,000 lb Hydraulic Recovery Winch | 46 fpm
Entry-level hydraulic recovery winch for marina trailer operations and lighter vessel hauling.
50,000 lb Hydraulic Recovery Winch | Long Drum, Air
The highest-capacity hydraulic winch in the range, built for commercial marine yards pulling large vessels, positioning barges, and handling the heaviest boat ramp and dry dock operations.
Electric Winches
Electric winches handle marine applications where hydraulic infrastructure isn’t practical — dock-side pulling, boat lift operations, and shore-based hauling. The 110V winch runs off standard marina power for stationary installations at docks and lifts. The 12,500 lb electric unit handles trailer-mounted and mobile applications where battery or generator power is available but hydraulic lines are not.
11,000 lb 110V Worm Gear Winch | 8 in Drum
110V electric winch that runs off standard marina power for stationary dock and lift installations.
12,500 lb 12V Worm Gear Winch | 8 in Drum
Portable electric winch for marine applications where hydraulic lines aren’t practical — trailer-mounted and mobile applications.
Controls & Remotes
Marine operators need to control equipment from a distance — standing on a dock while a boat winches onto a trailer, positioned at the bow while a lift operates, or on deck while shore-side equipment runs. Wireless remotes eliminate the need to be at the power unit during operation. The 10-function Lodar system handles the complex multi-circuit setups on commercial marine equipment where an operator needs to control winches, lifts, valves, and auxiliary functions from a single weatherproof transmitter.
10 Function Lodar IP Wireless System | 9 Series FET
Ten-function Lodar system for complex commercial marine equipment — controlling winches, lifts, valves, and auxiliary functions from a single weatherproof transmitter.
6 Function Lodar IP Wireless System | 9 Series FET
Six-function wireless system for marine operations controlling multiple circuits from a single weatherproof transmitter.
2 Function Wireless Control System | PS Series
Wireless remote for operating winches and hydraulic functions while standing on a dock, at the bow, or anywhere around the vessel and trailer.
Hydraulic Power Units
Hydraulic power units run the winches, lifts, and deck equipment used in marine operations. The 2-way power up / power down unit provides controlled operation in both directions — important when lowering boats on cradles or controlling descent on marine lifts where gravity alone could be dangerous. The 4-way pump handles multi-circuit setups common on commercial marine equipment, where winch, lift, and auxiliary functions all run off one power source.
Bucher 2-Way Hydraulic Power Unit | 2 gal Poly
Two-way power up / power down unit for marine applications where controlled operation in both directions is essential — lowering boats on cradles or controlling descent on marine lifts.
Bucher 4-Way Hydraulic Power Unit | 6 qt Poly
Four-way pump for multi-circuit marine setups where winch, lift, and auxiliary functions all run off one power source.
Industrial Winches
The industrial hydraulic winch serves mid-range marine pulling duties — positioning boats in maintenance bays, pulling equipment along docks, and running anchor or mooring lines in smaller commercial marine operations. The industrial mount and drum configuration handles the horizontal pulling and positioning work that’s common in marina and boatyard operations.
