Cattle & Ranching
Hay & Bale Handling
Feeding cattle is a daily job that runs year-round, and the equipment here handles the core of that work. Bale spears and the 3-point spike kit pick up and transport round and square bales from storage to feed areas. The bale unroller lets a single operator roll out hay along a feed line without leaving the tractor seat — a job that otherwise requires cutting twine and spreading by hand. The Bucher dual action pump powers bale spear hydraulics with controlled up and down movement, so the operator can place and position bales precisely rather than relying on gravity drop.
Bucher Dual Action (Power Up / Power Down) Hydraulic Pump
Powers bale spear hydraulics with controlled up and down movement. The dual action lets the operator place and position bales precisely during stacking rather than relying on gravity drop, which can break bales apart.
$691.00
PM-3554-0131
3 Point Tractor Bale Spike
Mounts to the tractor’s three-point hitch for picking up and transporting round and square bales. A straightforward attachment that turns any three-point equipped tractor into a bale mover for daily feeding runs.
$386.00
ABS3PTLDK
3-Point Hay Bale Unroller
Rolls out round bales along feed lines directly from the tractor, eliminating the manual work of cutting twine and spreading hay by hand. A single operator can lay out a full feed line without leaving the tractor seat.
AHBR1
Truck Bed Gooseneck Hay Bale Mover
Front-loader mounted bale spear for picking, carrying, and placing round bales. The primary tool for moving bales from storage to feed areas on a daily basis across the cattle operation.
$2,158.00
ABS1K
Fence & Post
Fence maintenance is constant on a cattle operation — rotational grazing means moving temporary fence lines, damaged posts need replacing, and expansion or reconfiguration of pastures requires pulling existing posts. The hydraulic t-post puller removes metal t-posts cleanly without bending them, so they can be reused. That saves both the cost of new posts and the labor of wrestling bent posts out of the ground by hand.
Hauling
A factory bed dump kit turns the ranch pickup into a utility vehicle that hauls feed, salt blocks, fencing supplies, and loose materials to wherever they’re needed on the property — then dumps the load without hand-unloading. On a cattle operation, that truck might haul supplement feed to a pasture in the morning and a load of gravel to patch a road in the afternoon.
Frequently Asked Questions
Can't find the answer you're looking for? Contact our team and we'll get back to you.
Do cattle sirens actually work?
Yes, cattle sirens are effective in summoning cattle to feeding areas. The method relies on conditioning cattle to associate the siren’s sound with the availability of food. Initially, cattle may respond slowly as they learn the association. However, with consistent use, they typically begin to approach quickly upon hearing the siren, similar to other animals trained with auditory cues. Historically, ranchers relied on vehicle horns, which often led to wear and damage. Cattle sirens provide a durable and efficient alternative, reducing strain on vehicle components while achieving the same result.
Is there a lot of maintenance with a siren?
Nope! Occasionally check to make sure there is no debris in the fan by carefully inspecting the PIERCE cattle siren.
Where should I mount the cattle siren?
It can be mounted to a car, truck, SUV, ATV, UTV or tractor. It can be mounted to virtually any vehicle as long as you have a 12 volt battery source for power. Keep mounting away from tires, and places where low lying tree branches or brush could damage it.
Do I need the standard or the heavy-duty cattle siren?
The heavy duty boasts a louder siren that runs for 8 minutes longer than the standard. We suggest the heavy-duty siren for daily use. If you’re using the siren a couple times a week the standard should suit your needs.
How far does the siren sound travel?
There are a number of variables to consider when answering this question. Wind, weather, terrain, mounting placement and other factors will contribute to how far the sound travels. With that said, customers report effectiveness up to a mile away.
Does the PIERCE Bale Unroller have greased bolts and or grease fitting at all moving points?
Yes. Grease-zerks are found at all moving points.
Does the PIERCE Bale Unroller easily hookup to the quick tractor connects that are popular?
We are looking at utilizing the quick connect option on future revisions of this piece of equipment.
Will the Bale Unroller hook up to both Cat 1 / Cat 2?
Yes
What size bales can the PIERCE Bale Unroller pick up?
The unroller will pick up 5 and 6 foot bales, and will also pick up 4 ft. bales using the extensions.
Will the PIERCE Bale Unroller roll the whole bale out without waste?
The solid “core” will be left (most farmers/ranchers will find a way to feed this as well).
How often should I grease my PIERCE Bale Unroller and what type of grease should I use?
We recommend multipurpose grease (RED). Grease your PIERCE unroller before seasonal use, inspect it every three months, and grease as needed.
How do I hook up the hydraulic connections?
Plug the male into the ½” female breakaway coupler.
Where are PIERCE bale spikes made?
Our shop is located in Henrietta, Texas, United States, where we fabricate, weld, assemble, and service our bale spikes.
How long does the Hydraulic Bale Spear take to lift a bale typically?
With normal pressure and a standard bale you are looking at 15 to 20 seconds.
How long can I expect my PIERCE Hydraulic Bale Spear to last?
With proper maintenance, a 20-year life can reasonably be expected. We routinely see PIERCE bale spikes manufactured in the early 90s still working on ranches locally.
What is the difference between the Gooseneck Bale Spear (ABS1K) and the Bolt-in Bale Spear (ABS2K)?
The ABS1K hay spear installs directly over a gooseneck ball; in comparison, the ABS2K bolts into the truck bed so you can haul trailers while the spear is mounted. Both units come equipped with removable bale spears.
What is the weight limit of Pierce Hydarulic Hay Bale Spears?
PIERCE bale spears have a lifting capacity of 2,500 lbs. NOTE: Picking up bales wider than the rear opening of your truck bed may result in truck damage. Also, Lifting anything other than hay bales will void the warranty and most likely damage your system.
Videos
Check out how to install the PIERCE 2T Dump Bed Kit with the official PIERCE overview on YouTube.
Factory Bed Dump Kit
PIERCE Heavy Duty Cattle Siren Unboxing
Heavy Duty Cattle Siren
3-Point Hay Bale Unroller
3-Point Hay Bale Unroller
3-Point Hay Bale Unroller
3-Point Hay Bale Unroller
What's the difference between the PIERCE Bale Spikes?
Truck Bed Gooseneck Hay Bale Mover
PIERCE Bolt-in Bale Spike Installation Process (ABS2K)
Truck Bed Gooseneck Hay Bale Mover
PIERCE Gooseneck Bale Spike Installation Process (ABS1K)
Truck Bed Gooseneck Hay Bale Mover
