Product Information

Read more

Factory Dump Bed Kit

With 4,000 lbs of possible lifting strength, the PIERCE dump bed kit can make your work truck more effective at home or on the job. The hoist kit is designed to allow the truck bed to remain the same height and go undetected when installed properly.  All hydraulic and electric components, wired control, scissor assembly, mounting brackets, hinges, and mounting hardware are included.


Dump Kit Specifications

  • Load capacity : 2 Tons (4,000 LBS)
  • Maximum angle: 45 degrees
  • Dumping time: 10 sec.
  • Breaker: 200 amp, 12VDC
  • Pump pressure: 2,500 psi lifting and 500 psi lowering
  • Cylinder has a working pressure of 3,000 psi, with a test pressure of 4,500 psi

Dump Kit Installation

  • With experience, most dump kit installation typically takes 12 to 16 hours. If this is your first time, expect to spend at least 16 to 24 hours of work to complete your dump kit conversion.
  • Kit includes hydraulic cylinder, pump, fittings, hoses, hinges, cut parts, wiring, and a control. We offer various different remote options to suit your application.
  • As with any dump kit, care must be taken not to exceed the capacity of the truck.
  • PIERCE Dump kits are not rated to be towed with a gooseneck hitch or off the bumper. Trailers are ONLY to be towed by frame-mounted receiver hitches.

We recommend reinforcing your truck bed. If you need any assistance or consultation call us at 800-658-6301.

FIT NOTES (please read before purchasing)

  • Stock Bed Dump Kits are specified by make, model, and year of truck. To find out which kit you need please click here to view the Fit Kit chart.

Please note the photos listed may vary depending on your truck model.

Resources

Manual
DK2UCSBK99PD - Stock Bed Dump Kit Manual
Manual
DK2UCLB99KPD - Chevy Stock Bed Dump Kit Manual
Manual
DK2UDNKPD - Dodge Dump Kit Manual
Manual
DK2UDKPD - Dodge Kit Manual
Manual
DK2UFKPD - Ford Dump Kit Manual
Manual
DK2UKPD - Universal Manual
Manual
DK2UCSBKPD - CHEVY/GM 1988-1998 Short Bed Manual
Manual
DK2UCKPD - Dump Kit Manual
Guide
Pump Troubleshooting Guide
Read more

Factory Dump Bed Kit

With 4,000 lbs of possible lifting strength, the PIERCE dump bed kit can make your work truck more effective at home or on the job. The hoist kit is designed to allow the truck bed to remain the same height and go undetected when installed properly.  All hydraulic and electric components, wired control, scissor assembly, mounting brackets, hinges, and mounting hardware are included.


Dump Kit Specifications

  • Load capacity : 2 Tons (4,000 LBS)
  • Maximum angle: 45 degrees
  • Dumping time: 10 sec.
  • Breaker: 200 amp, 12VDC
  • Pump pressure: 2,500 psi lifting and 500 psi lowering
  • Cylinder has a working pressure of 3,000 psi, with a test pressure of 4,500 psi

Dump Kit Installation

  • With experience, most dump kit installation typically takes 12 to 16 hours. If this is your first time, expect to spend at least 16 to 24 hours of work to complete your dump kit conversion.
  • Kit includes hydraulic cylinder, pump, fittings, hoses, hinges, cut parts, wiring, and a control. We offer various different remote options to suit your application.
  • As with any dump kit, care must be taken not to exceed the capacity of the truck.
  • PIERCE Dump kits are not rated to be towed with a gooseneck hitch or off the bumper. Trailers are ONLY to be towed by frame-mounted receiver hitches.

We recommend reinforcing your truck bed. If you need any assistance or consultation call us at 800-658-6301.

FIT NOTES (please read before purchasing)

  • Stock Bed Dump Kits are specified by make, model, and year of truck. To find out which kit you need please click here to view the Fit Kit chart.

Please note the photos listed may vary depending on your truck model.

Customer Reviews

Based on 19 reviews
84%
(16)
11%
(2)
5%
(1)
0%
(0)
0%
(0)
j
jason schmidt

still waiting to install

T
Trey Ragusa

Easy to install, little fabrication

D
Dick Alexander
Great product

Have not installed as of yet, but plan to in next few weeks so we'll see how that goes. But transaction went well ,arrived on time with no damage very pleased so far

N
Nick Pritchett
It's a Pierce

This kit was pretty easy to install. The instructions are a little vague but I was able to manage. In the instructions it states to use pvc fittings. Which did not fit, I had to use cpvc on my particular model, 09 2500hd long bed you have to relocate the charcoal box. But very pleased with the speed of the functions both up and down. The pump and tank are perfect size. I have two dump truck and I highly recommend this kit.

J
Joseph Croghan
Croghan

Only had one issue with the wiring. Keep tripping the breaker called pierce they figure out the problem fixed in in minutes. The instructions were a little vague but not bad

by PIERCE

4.7

19 reviews

Factory Bed Dump Kit

DK2UKPD

Regular price
$1,695.00
Sale price
$1,695.00
Regular price
Shipping calculated at checkout.
Truck Make:
Truck Year:
Bed Frame | Model:

Check Out These Related Products