Name: 2 Function Replacement Keypad Receiver | 9 Series
Brand: Lodar LTD
SKU: 9202RXK
Price: 605.00 USD
Availability: InStock

The 2 Function Lodar Replacement FET Keypad Receiver from Lodar LTD showcases a transparent electronic control box equipped with a circuit board and colored buttons on the left side, featuring a built-in keypad for seamless control.

2 Function Replacement Keypad Receiver | 9 Series

$605.00

2 Function Replacement Keypad Receiver | 9 Series

9202RXK

$605.00

Out of Stock

This is a replacement FET Keypad receiver for Lodar 9 Series wireless control systems — 2-function, FET output switching rated to 10 A, with an integrated keypad. The receiver mounts on the equipment, receives the signal from the transmitter, and switches the output functions. Includes a master output — an additional output that fires on every function: once wired in, it energizes whenever any function is operated, for equipment that must run in conjunction with the controls (a hydraulic power unit running while a lift function operates, a safety light while winching).

Replacement part for an existing Lodar 9 Series wireless system — a receiver is not a standalone product. It pairs with a matching transmitter on the same series and function count.

What does the keypad receiver add?

The keypad comes installed on the receiver box — a fixed local-control option alongside the wireless transmitter, so the equipment can also be operated by hand at the receiver. Electrically it is a standard 10 A DC FET 9 Series receiver.

2-function FET Keypad receiver
For Lodar 9 Series wireless control systems
Master output — an additional output that fires on every function
Keypad installed on the receiver box
DC FET output switching · 10 A · 12/24V DC · Wide Band
Lodar SKU 9202RXK

Match the trailing code. Lodar 9 Series transmitters and receivers carry a trailing match number. Check the unit you are replacing: no number means -8, the most common code we carry, and some systems use -3. If your existing system or part is coded anything other than -8, contact us so we send the correct unit.

This is a replacement part — it goes on the 2-function 9 Series wireless system. See the complete 2 Function IP Wireless Control System or 2 Functions Mini Wireless Control System or 2 Function Standard Wireless Control System. Pair it with the matching 2 Function transmitter on the same system.

Check Your Part Number Before Ordering

Check if your part number starts with an "LS" or a "PS". If so, this indicates specific firmware and other customizations that will not be on this replacement unit. You will want to contact the manufacturer and order the specific replacement part for your system.

Lodar 5 Year Pro-rated Warranty

Warranty is pro-rated and guarantees that product will be free of defect and faults from the manufacturer. See Lodar terms and conditions for more details.

Functions

Operating Voltage

12/24 Volts DC

Receiver IP Rating

IP 54

Operating Distance

200 ft. (61 m.)

Max Amps

Series

9000 Series

Special Features

Receiver Keypad

Channel

Wide Band, Fixed

Type

Receiver Only

Warranty

Lodar 5 Year Pro-rated Warranty

2 Function Lodar Standard Transmitter | 9 SeriesSKU: 92102TX-8

$247.00

9202RXK Spec Sheet Spec Sheet

5 Year Pro-Rated Warranty

For the first 2 years Warranty is unlimited.

During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

For the following 3 years Warranty is pro-rated.

During that period, your Distributor will replace with a new product at a discounted price.
These prices are set by each Distributor.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

Conditions

We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
Lodar 8000 Series are now totally out of warranty and are not covered.
Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.

5 Year Pro-Rated Warranty

For the first 2 years Warranty is unlimited.

During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

For the following 3 years Warranty is pro-rated.

During that period, your Distributor will replace with a new product at a discounted price.
These prices are set by each Distributor.
The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.

Conditions

We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
Lodar 8000 Series are now totally out of warranty and are not covered.
Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.