The P045NH is the no-hook version of the P045 snatch block — same 8,000 lb working load limit and sheave grooved for wire rope up to 1/2 in, but without the swivel hook attached. Attach via your own shackle or pin to match the rigging point.
When should I pick the no-hook version?
Three cases. You're rigging to a shackle and pin instead of a hook (common on industrial recovery setups). You already have your own hook spec'd to your loads. Or you want the lighter, simpler block at lower cost. If you want a ready-to-rig block, get the P045 with the hook included.
- 8,000 lb working load limit (WLL)
- 4.5 in block, bronze bushed
- Sheave grooved for wire rope up to 1/2 in
- No hook — supply your own shackle, pin, or hook
- Pierce SKU P045NH — typically in stock
For the version with the swivel hook included, see the 8,000 lb Snatch Block with Safety Swivel Hook. For the 10,000 lb version, see the 10,000 lb Snatch Block.
Doubling your winch with a snatch block? Use our winch capacity calculator to figure out the effective pulling capacity for your setup.
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
