PIERCE 110V Electric Winch – 7,500 lb, 8" Split Drum
Save 20% by bundling together!
Winch Cable
Controls

PIERCE 110V Electric Winch – 7,500 lb, 8" Split Drum
Description
Compact Split-Drum Winch for Dual Pull Points
The PIERCE PS654-8EKSD delivers 7,500 lb of pulling capacity in a compact 8" split-drum configuration. Designed for docks and industrial setups requiring two separate cables, each side supports half the drum length for balanced control. Its slow, deliberate worm-gear motion enhances operator safety and precision. Built to order and ships in 1–2 business days.
- 7,500 lb rated capacity (split drum halves cable length per side)
- 8" split drum for compact dual-anchor setups
- 110V AC worm-gear drive with strong load-holding brake
- Includes PBM1 cradle mount and wired control
Applications: Boat docks, maintenance lifts, marine equipment positioning, and shop pulling stations.
⚠️ A certified electrician is required to install this product. Do not attempt installation without proper certification or training.
Specifications
Specification | Details |
---|---|
AMP DRAW | 17.4 |
BRAKE TYPE | Worm Gear Brake |
CLUTCH TYPE | Dog |
CONSTRUCTION | Cast Metal |
DRUM ROTATION | Counter-Clockwise (Underwound) |
DRUM SIZE | 3 ½ in. x 8 in. Split |
GEAR RATIO | 460:1 |
GEAR TYPE | Worm Gear |
MAX CAPACITY (LBS.) | 7500 |
MAX LINE SPEED | 4 fpm |
MOTOR (HP) | 1.5 |
OPERATING VOLTAGE | 110 Volts AC |
POWER SOURCE | Electric, AC |
RECOMMENDED WIRE | 12-14 gauge |
RECOMMENDED WIRE ROPE | ⅜ in. x 50 ft. (2) |
FAQs
Can I use a fuse to protect my winch and vehicle?
What precautions should I take when pulling heavy loads?
How can I provide a safe anchor point while winching?
How can I double my winch pulling capacity?
How much pulling power do I need from my winch?
How do I secure a load with my winch?
What maintenance is required on my winch?
How do I re-spool the wire rope onto my winch?
What should I do about my vehicles wheels while winching?
Can I increase the line speed of my worm gear winch?
Resources
Videos
Warranty
Replacement Parts

Control Box for 110V PIERCE 654 Series Single Phase Winch
The enclosed IP65 high impact thermoplastic enclosure for this switch includes a red front mounted handle and labels for FWD/REV and UP/DOWN. Designed for single phase motors, it features self-cleaning contacts, silver alloy plating, and a UL94V0 ...

Standard Winch Mount 654 Series
The standard winch mount for 654 series is a heavy duty mount with 1/4" plated steel, and pre-drilled holes. The product aids in mounting the winch to flat surfaces.

3/8" Winch Cable
Expertly crafted for toughness and durability, our 3/8" winch cable boasts a remarkable breaking strength of 14,400 lbs. Each cable assembly is built to last and includes a heavy duty thimble with hook and compressed splicing sleeve for added sa...