Lodar LTDs 8 Function IP Wireless Actuator Control System, 92 Series with FET Air Receiver, includes wiring, a control box, remote, and injection components arranged on a white background.

8 Function IP Wireless Actuator Control System | 92 Series | FET Air Receiver

$2,834.00
Skip to product information
Lodar LTDs 8 Function IP Wireless Actuator Control System, 92 Series with FET Air Receiver, includes wiring, a control box, remote, and injection components arranged on a white background.

8 Function IP Wireless Actuator Control System | 92 Series | FET Air Receiver

92258-8
$2,834.00

Choose Your Labels

1
Quick Select Choose a preset configuration or customize below
Your Configuration Click on a zone to select an icon
Configuration template
F1 Click to select
F2 Click to select
F3 Click to select
F4 Click to select
F5 Click to select
F6 Click to select
F7 Click to select
F8 Click to select
In Stock

This 8-function 92 Series wireless system includes pneumatic actuators and an Industrial handheld transmitter. Control four valves (two directions each) from a rugged, water-resistant setup built for harsh conditions.

  • 8 functions = 4 valves of wireless control
  • Includes bolt-on pneumatic actuators
  • Industrial handheld transmitter (IP65) with batteries included
  • Receiver sealed to IP65
  • Requires onboard air supply (90–120 PSI) and 12V DC power

Related options: Don’t need actuators? See the 8-Function Industrial Transmitter version without actuators.

Applications: Recovery rigs, ag equipment, and industrial hydraulics operating in wet or tough environments.

What's Included
Specifications
Transmitter
Industrial Pro
Functions
8
Actuator
Air
Operating Voltage
12/24 Volts DC
Transmitter IP Rating
IP 65
Receiver IP Rating
IP 65
Operating Distance
150 ft. (45 m.)
Max Amps
15
Series
9000 Series
Transmitter Batteries
AAA x 4
Special Features
Receiver with Air I/O + Air Actuators
Frequency
433 MHz
Type
Full System
Wiring Included
8 ft. power / 5 ft. air input / 3½ ft. air outputs
Replacement Parts (2)
FAQs (1)
What is a Lodar air actuator, and how is it used with a control rod?
A Lodar air actuator is a pneumatic cylinder used in wireless or remote control systems to convert an air signal into linear motion. It’s typically used to operate a control rod or lever (e.g. for valves, switches, linkages) without manual intervention. In setups with a control rod, the actuator is mounted adjacent to or above the rod such that its push/pull motion aligns with the rod’s direction of travel. The actuator’s output end is linked to the rod (often via a clevis or bracket) to impart motion.
Warranty
5 Year Pro-Rated Warranty
For the first 2 years Warranty is unlimited.
  • During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
  • The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.
For the following 3 years Warranty is pro-rated.
  • During that period, your Distributor will replace with a new product at a discounted price.
  • These prices are set by each Distributor.
  • The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.
Conditions
  • We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
  • We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
  • Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
  • Lodar 8000 Series are now totally out of warranty and are not covered.
  • Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.
5 Year Pro-Rated Warranty
For the first 2 years Warranty is unlimited.
  • During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
  • The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.
For the following 3 years Warranty is pro-rated.
  • During that period, your Distributor will replace with a new product at a discounted price.
  • These prices are set by each Distributor.
  • The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.
Conditions
  • We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
  • We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
  • Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
  • Lodar 8000 Series are now totally out of warranty and are not covered.
  • Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.
Reviews

Related products