Snatch Block | 4,000 lb WLL | Safety Swivel Hook

The P045S is a traditional-style snatch block with a 4,000 lb working load limit and an integrated safety swivel hook. Sheave grooved for wire rope up to 3/8 in. Screw-out hook pin lets cable be inserted by swiveling a side plate; all parts retained by snap rings to prevent loss in the field.

When is the 4,000 lb size enough?

Light-duty pulls where the winch itself is under 8K capacity. Doubling a 4K winch via this snatch block gives you 8K effective pulling power. For bigger winches, step up to the 8K (P045) or 10K (PLB1030B) blocks — the smaller block isn't rated for the higher loads.

• 4,000 lb working load limit (WLL)
• Sheave grooved for wire rope up to 3/8 in
• Safety swivel hook with safety latch included
• Screw-out hook pin; snap-ring retained parts
• Pierce SKU P045S — typically in stock

For higher capacity, see the 8,000 lb Snatch Block or 10,000 lb Snatch Block.

Doubling your winch with a snatch block? Use our winch capacity calculator to figure out the effective pulling capacity for your setup.

⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.