The PLB1030B is a 10,000 lb working load limit snatch block — the heavy-duty option in the PIERCE snatch block line. 10 in block with a 5 in sheave, 1 in pin, and 3 in attachment hole. No hook included; attaches via the 3 in hole.
What does a snatch block do for a winch?
It doubles your winch's pulling capacity by routing the cable through a moving pulley — half the load on the cable, half the strain on the motor, twice the pulling power at the load. Also lets you change pull direction (run the cable around a corner). Essential for stuck-vehicle recoveries beyond a single-line pull.
- 10,000 lb working load limit (WLL)
- 10 in block, 5 in sheave
- 1 in pin, 3 in attachment hole
- For 3/8 in winch cable
- Grease zerk for easy maintenance
- No hook — attach via the 3 in hole
- Pierce SKU PLB1030B — typically in stock
For lighter-duty options, see the 8,000 lb Snatch Block or 6,000 lb Snatch Block. For a version with a swivel hook included, see the 8,000 lb Snatch Block with Safety Swivel Hook.
Doubling your winch with a snatch block? Use our winch capacity calculator to figure out the effective pulling capacity for your setup.
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
