The transparent plastic case elegantly reveals the 2 Function Lodar Replacement FET Receiver from the 92 Series, showcasing its visible components and connectors. Designed by Lodar LTD, it boasts an IP67 rating, ensuring robust protection against dust and water.

2 Function FET Receiver | No Master | 9 Series

9200RX

$394.00

In Stock

This is a replacement FET receiver for Lodar 9 Series wireless control systems — 2-function, FET (solid-state) output switching rated to 10 A per output. The receiver mounts on the equipment, receives the signal from the transmitter, and switches the output functions. This is the No Master Output variant — it has the function outputs only, without the additional master output (a master output fires on every function, to run equipment such as a power unit or safety light in conjunction with the controls).

Replacement part for an existing Lodar 9 Series wireless system — a receiver is not a standalone product. It pairs with a matching transmitter on the same series and function count.

FET or Relay receiver — which do I need?

Match what your existing system uses. A 9 Series FET receiver switches outputs with solid-state transistors — no contacts to wear, well suited to high-cycle operation — and is rated to 10 A per output. Relay receivers switch with electromechanical relays and are rated to 5 A per output. That amp rating has a practical consequence: if any function on your system draws more than 5 A, you need the FET receiver. The two are not interchangeable in a system; replace a FET receiver with a FET receiver.

  • 2-function FET receiver
  • For Lodar 9 Series wireless control systems
  • No master output — function outputs only
  • DC FET output switching · 10 A · 12/24V DC · Wide Band
  • Lodar SKU 9200RX

Match the trailing code. Lodar 9 Series transmitters and receivers carry a trailing match number. Check the unit you are replacing: no number means -8, the most common code we carry, and some systems use -3. If your existing system or part is coded anything other than -8, contact us so we send the correct unit.

This is a replacement part — it goes on the 2-function 9 Series wireless system. See the complete 2 Function IP Wireless Control System or 2 Functions Mini Wireless Control System or 2 Function Standard Wireless Control System. Pair it with the matching 2 Function transmitter on the same system.

Check Your Part Number Before Ordering

Check if your part number starts with an "LS" or a "PS". If so, this indicates specific firmware and other customizations that will not be on this replacement unit. You will want to contact the manufacturer and order the specific replacement part for your system.

Lodar 5 Year Pro-rated Warranty

Warranty is pro-rated and guarantees that product will be free of defect and faults from the manufacturer. See Lodar terms and conditions for more details.
What's Included
Specifications
Functions
2
Operating Voltage
12/24 Volts DC
Receiver IP Rating
IP 67
Operating Distance
200 ft. (61 m.)
Master Output
No
Max Amps
10
Series
9000 Series
Type
Receiver Only
Warranty
Resources
Warranty
5 Year Pro-Rated Warranty
For the first 2 years Warranty is unlimited.
  • During that period, your Distributor (in the USA, our Service Department) will repair or replace free of charge, at their discretion, any product that is proved to be faulty.
  • The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.
For the following 3 years Warranty is pro-rated.
  • During that period, your Distributor will replace with a new product at a discounted price.
  • These prices are set by each Distributor.
  • The Warranty period is taken from the date the goods leave our factory, although we will accept a later date if the Distributor can confirm date of purchase.
Conditions
  • We must receive back either an individual Transmitter or both Transmitter and Receiver, at your cost.
  • We will not accept individual Receivers. Always send both transmitter and receiver unless otherwise requested.
  • Discounted products will carry a further 2-year unlimited warranty. After 5 years Lodar cannot be repaired and will be scrapped.
  • Lodar 8000 Series are now totally out of warranty and are not covered.
  • Call us to explain the problem, making sure you have both the model number and the serial number on hand. More often than not, we can resolve the matter over the phone.
Reviews

No reviews yet. Be the first to write one.

Write a review

Reviews are published after they are checked. API-submitted reviews cannot be marked verified.

Rating
© 2026 PIERCE