Product Information
The PIERCE flatbed dump kit is designed as a comprehensive solution for trucks with an after-market flatbed or dump body. Make any job faster, easier, safer, and less stressful with the PIERCE Dump Kit. It can easily convert your trailer into a dump trailer, but some modifications may be needed. We highly recommend reinforcing your truck bed for optimal results. If additional assistance or consultation is needed, please contact us at 940-538-5643. This specific kit can lift up to 10,000 lbs., but please ensure that you do not surpass your truck or trailer's maximum load rating. The kit includes everything needed for installation, except for tools and other commonly used hardware. Keep in mind that each installation may vary depending on the truck. While the kit is intended for DIY use, we suggest seeking the help of a garage or body shop familiar with truck bed installations and modifications. Join the thousands of people who are saving their time, money, and backs with the PIERCE Dump Kit. Please note this kit with the 24 Volt Hydraulic Pump is less common and is built to order.
What is Included
- 1 x Scissor Top
- 2 x Scissor s
- 1 x Crossmember
- 1 x Shaft A 7.5 in.
- 1 x Shaft B 13.5 in.
- 1 x Shaft C 19.5 in.
- 1 x Hydraulic Cylinder
- 6 x 7/32 in. x 2 in. Roll Pin
- 1 x Driver Side Frame Hinge
- 1 x Passenger Side Frame Hinge
- 2 x Frame L Bracket
- 2 x Guides
- 2 x Shaft D 9.5 in.
- 1 x Pump Bracket
- 1 x Scissor Support Bar
- 1 x Driver Side Sill Hinge
- 1 x Passenger Side Sill Hinge
- 2 x Sill Supports
- 2 x 3/8 in. - 16 x 1.25 in. G5 Hex Head Bolt
- 8 x 1/2 in. - 16 x 3 in. G8 Hex Head Bolt
- 10 x 1/2 in. Flat Washer
- 12 x 1/2 in. - 13 Locknut
- 2 x 3/8 in. Lock Washer
- 4 x 7/32 in. x 2 in. Roll Pin
- 2 x 1/2 in. - 13 x 1.5 in. G8 Hex Head Bolt
- 2 x 1/2 in. - 13 x 1.25 in. G8 Hex Head Bolt
- 2 x 1/2 in. - 13 x 8 in. G8 Hex Head Bolt
- 2 x 3/8 in. x 1 in. G8 Hex Head Bolt
- 2 x 3/8 in. Locknut
- 2 x 3/8 in. Flat Washer
- 1 x 3/4 in. - 10 x 2.5 in. G8 Hex Head Bolt
- 1 x 3/4 in. G8 Locknut
- 2 x 3/4 in. Flat Washer
- 1 x Safety Prop Leg
- 1 x Safety Prop Cup
- 1 x 8 in. Black UV Zip Ties
- 1 x Instruction Manual
- 1 x 200 Amp Breaker
- 1 x 20 ft. #4 Welding Cable - Black
- 1 x 20 ft. #4 Welding Cable - Red
- 6 x 5/16 in. Battery Eye
- 1 x 2 Button Universal Remote with 20 ft. Cord
- 1 x 3/4 in. x 1/4 in. 90º Swivel O-Ring Fitting
- 1 x 3/8 in. Male x 1/4 in. Female 90º Swivel Fitting
- 1 x #8 Straight O-Ring Male to 1/4 in. Female Pipe Fitting
- 1 x 5 ft. Hydraulic Hose
- 1 x 7 ft. Hydraulic Hose
- 1 x Bucher 24V Power Up/Power Down Hydraulic Pump
Specifications
Specification | Details |
---|---|
MAX CAPACITY (LBS.) | 10000 |
OPERATING VOLTAGE | 24 Volts DC |
MAX OIL FLOW (GPM) | 1.5 |
OPERATIONAL PRESSURE (PSI) | 3250 |
RESERVOIR CAPACITY | 2.5 Gallons |
RESERVOIR MATERIAL | High Density Polyethylene |
HOSE CONNECTIONS | #6 SAE |
RECOMMENDED FLUID | ATF (Automatic Transmission Fluid) |
PUMP DIRECTIONS | 2-Way (Power Up / Power Down) |
OPERATING TEMPERATURE RANGE | -20ºF to 130ºF (-30ºC to 55ºC) |
MAXIMUM ANGLE (º) | 45º |
DUMPING TIME | 30-90 seconds |
CYLINDER MEASUREMENTS | 4" x 14" x 2" |
DKLKPD Capacity vs. Bed Overhang
Overhang | 8' Bed | 10' Bed | 12' Bed |
---|---|---|---|
None | 4.75 T | 3.75 T | 3 T |
12" | 5 T | 4.75 T | 3T |
24" | 5 T | 4.75 T | |
36" | 5T |
Resources
The PIERCE flatbed dump kit is designed as a comprehensive solution for trucks with an after-market flatbed or dump body. Make any job faster, easier, safer, and less stressful with the PIERCE Dump Kit. It can easily convert your trailer into a dump trailer, but some modifications may be needed. We highly recommend reinforcing your truck bed for optimal results. If additional assistance or consultation is needed, please contact us at 940-538-5643. This specific kit can lift up to 10,000 lbs., but please ensure that you do not surpass your truck or trailer's maximum load rating. The kit includes everything needed for installation, except for tools and other commonly used hardware. Keep in mind that each installation may vary depending on the truck. While the kit is intended for DIY use, we suggest seeking the help of a garage or body shop familiar with truck bed installations and modifications. Join the thousands of people who are saving their time, money, and backs with the PIERCE Dump Kit. Please note this kit with the 24 Volt Hydraulic Pump is less common and is built to order.
Light Duty Flat Bed Dump Kit - 24 Volt Pump
DKLKPD24
- Regular price
- $2,345.00
- Sale price
- $2,345.00
- Regular price
-
Check Out These Related Products
- Choosing a selection results in a full page refresh.