This 12V winch motor (three post) with gears installed is used as a replacement worm drive winch motor in the following brands:
Standard equipment for PIERCE winches. Runs at 1.5 hp. The motor is composed of high-temperature components, fore and aft ball bearings, and 3/4″ shaft cut for a woodruff key. The two parallel posts are fields while the post in the rear is the armature.
12V motor kit for PS654 series winch with the motor gear installed on the motor shaft. Motor is setup and ready for installation.
|Dimensions||14.0 × 9.0 × 9.0 in|