How to Install a Cattle Siren

The PIERCE Cattle Siren is easily mounted to your car, truck, SUV, ATV, UTV or tractor (not recommended for bicycles ;). This handy siren does the work of calling in cattle for feeding time.

How to Install a Cattle Siren:

  1. Keep the PIERCE cattle calling siren away from tires. During rain the tires kick up water and may damage the siren.
  2. Mount it away from places where low lying trees or brush could damage it.
  3. Ideally mount the siren to any flat surface. For example, the headache rack or in the engine bay compartment.
  4. The livestock siren can be mounted using ¼” bolts or #10 self tapping screws.
  5. Bolt or screw through the mount to the surface you are attaching the siren to.

 

How to Wire a Cattle Siren:

 

Heavy Duty Cattle Siren (PCH324) 

  1. Blue wire to the negative side of the battery.
  2. Red wire to a switch in the dash.  
  3. Run a 12v+ with inline 40 amp fuse from the battery to the other side of the switch in the dash.

Standard Cattle Siren (PS092BE)  

  1. Black wire to the negative side of the battery.
  2. Red wire to a switch in the dash. 
  3. Run a 12v+ with inline 40 amp fuse from the battery to the other side of the switch in the dash.
Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Free Shipping

  • Order Subtotal over $99
  • Order weight under 120 lbs.
  • Contiguous United States (Not Hawaii or Alaska)

Please note that items such as our dump kits or hay bale spikes may have free shipping promotions that are valid despite being over the stated 120 lb. limit shown here.

{"cart_token":"","hash":"","cart_data":""}