{"title":"Wireless Series","description":"Wireless control systems that let you operate your hydraulic equipment from a safe distance. Includes Lodar air and electric actuator systems in configurations from 1 to 40 functions — no cords, no tether, full control.","products":[{"product_id":"2-function-wireless-control-system-ps","title":"2 Function Wireless Control System | PS Series","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the handheld transmitter and the receiver, coded together at the factory and ready to wire to your equipment. Operates 2 functions.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Wireless Control System (PS002) gives you 2-function wireless control with a 150 ft (45 m) range on the 433 MHz band. Dc fet output switching, 3 A per output, 12\/24V DC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 3 A per output, with 5 A overload auto-shutdown to protect the circuit. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eHandheld transmitter - IP 65 rated\u003c\/li\u003e\n\u003cli\u003eFET receiver - DC output switching, 3 A per output (5 A overload auto-shutdown), 12\/24V DC, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003ePIERCE SKU PS002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther PIERCE wireless systems: the \u003ca href=\"\/products\/2-function-wireless-trailer-system\"\u003e2 Function Dump Trailer Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-wireless-remote-control-system\"\u003ePS004 4 Function Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-wireless-remote-control-system-roll-off-trailer-edition\"\u003ePS004B 4 Function Roll-Off System\u003c\/a\u003e. Replacement transmitters and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":43147699388668,"sku":"PS002","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_Wireless_Remote_Control_System.png?v=1774219304"},{"product_id":"2-function-wireless-dump-trailer-system-ps","title":"2 Function Dump Trailer Wireless System | PS Series","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the handheld transmitter and the receiver, coded together at the factory and ready to wire to your equipment. Operates 2 functions.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Dump Trailer Wireless System (PS002TS) gives you 2-function wireless control with a 150 ft (45 m) range on the 433 MHz band. Dc fet output switching, 3 A per output, 12\/24V DC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 3 A per output, with 5 A overload auto-shutdown to protect the circuit. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eHandheld transmitter - IP 65 rated\u003c\/li\u003e\n\u003cli\u003eFET receiver - DC output switching, 3 A per output (5 A overload auto-shutdown), 12\/24V DC, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003ePIERCE SKU PS002TS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther PIERCE wireless systems: the \u003ca href=\"\/products\/2-function-wireless-remote-control-system\"\u003e2 Function Wireless Control System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-wireless-remote-control-system\"\u003ePS004 4 Function Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-wireless-remote-control-system-roll-off-trailer-edition\"\u003ePS004B 4 Function Roll-Off System\u003c\/a\u003e. Replacement transmitters and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":43147732910332,"sku":"PS002TS","price":308.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_Wireless_Control_System_for_Dump_Trailer.png?v=1774219288"},{"product_id":"4-function-wireless-control-system-ps","title":"4 Function Wireless Control System | PS Series","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the handheld transmitter and the receiver, coded together at the factory and ready to wire to your equipment. Operates 4 functions.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Wireless Control System (PS004) gives you 4-function wireless control with a 150 ft (45 m) range on the 433 MHz band. Dc fet output switching, 3 A per output, 12\/24V DC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 4 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 3 A per output, with 5 A overload auto-shutdown to protect the circuit. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eHandheld transmitter - IP 67 rated\u003c\/li\u003e\n\u003cli\u003eFET receiver - DC output switching, 3 A per output (5 A overload auto-shutdown), 12\/24V DC, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003ePIERCE SKU PS004\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther PIERCE wireless systems: the \u003ca href=\"\/products\/4-function-wireless-remote-control-system-roll-off-trailer-edition\"\u003ePS004B 4 Function Roll-Off System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-wireless-remote-control-system\"\u003ePS002 2 Function Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-wireless-trailer-system\"\u003ePS002TS 2 Function Dump Trailer System\u003c\/a\u003e. Replacement transmitters and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":44744067875068,"sku":"PS004","price":412.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/PS004_Web-Photoroom.png?v=1774222005"},{"product_id":"2-function-pierce-wireless-transmitter","title":"2 Function Wireless Transmitter | PS Series","description":"\u003cp\u003e\u003cstrong\u003eReplacement transmitter for an existing PIERCE PS Series wireless system\u003c\/strong\u003e — a transmitter is the handheld unit and is not a standalone product. It pairs with a matching receiver on the same series and function count.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function PIERCE Mini Transmitter (PS002T) is the compact Mini handheld for a PIERCE PS Series system, sending 2 functions of control to the receiver on your equipment. It has a silicone rubber keypad, carries an IP 67 rating, runs on 2× AAA batteries, broadcasts on 433 MHz, and reaches a 150 ft (45 m) operating range.\u003c\/p\u003e\n\u003ch4\u003eWill this transmitter work with my receiver?\u003c\/h4\u003e\n\u003cp\u003eMatch three things: the series (PS Series), the function count (2), and the receiver it was coded to. Transmitters and receivers are paired on the same RF band, so replace a PS Series transmitter with a PS Series transmitter. If you are replacing a lost or damaged handset, confirm the receiver model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of control\u003c\/li\u003e\n\u003cli\u003eMini transmitter — silicone rubber keypad\u003c\/li\u003e\n\u003cli\u003eIP 67 rated, operates -22°F to 149°F (-30°C to 65°C)\u003c\/li\u003e\n\u003cli\u003ePowered by 2× AAA batteries\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range\u003c\/li\u003e\n\u003cli\u003e433 MHz fixed frequency, wide band\u003c\/li\u003e\n\u003cli\u003ePIERCE SKU PS002T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a replacement part — it goes on the 2-function PS Series wireless system. See the complete \u003ca href=\"\/products\/2-function-wireless-trailer-system\"\u003e2 Function Wireless Control System for Dump Trailer\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-wireless-remote-control-system\"\u003e2 Function Wireless Remote Control System\u003c\/a\u003e. Pair it with the matching \u003ca href=\"\/products\/2-function-fet-receiver-ps-series\"\u003e2 Function receiver\u003c\/a\u003e on the same system.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":43147760599292,"sku":"PS002T","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2F_Wireless_Remote_Transmitter1.png?v=1774219326"},{"product_id":"6-function-lodar-standard-wireless-electric-actuator-system-9-series","title":"6 Function Lodar Standard Wireless Electric Actuator System | 9 Series FET","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless electric actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the electric actuator drivers built into the box, coded together and ready to wire to your equipment. Operates 6 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 6 Function Lodar Standard Wireless Electric Actuator System (92156A-8) gives you 6-function wireless control with a 200 ft (61 m) range on the 418 MHz band. The receiver drives electric linear actuators directly from its outputs - no separate valve bank.  It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck your valve linkage before ordering.\u003c\/strong\u003e The electric actuators bolt onto the solid control rods your valve levers connect to, so you need clearance to mount them. A system with actuators included works only with solid \"bang-bang\" valve rods - not with valves operated by flexible cables or cords. If your valves are cable-operated, contact us.\u003c\/p\u003e\n\u003cp\u003eElectric actuators are a good fit for trucks that do not have onboard air - they drive the valve linkage electrically instead of pneumatically.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 6 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 functions of wireless control\u003c\/li\u003e\n\u003cli\u003e6 functions = 3 double-acting valves, two directions each\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eElectric actuator receiver - drives linear actuators directly, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92156A-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 6-function Lodar system? Compare the \u003ca href=\"\/products\/6-function-lodar-stainless-ip-wireless-system-9-series\"\u003e6 Function Lodar Stainless IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/6-function-lodar-standard-wireless-air-system-9-series\"\u003e6 Function Lodar Standard Wireless Air System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e\n\u003cp\u003eCommon uses: Tow trucks, utility fleets, and service rigs requiring rugged electric actuator-based wireless control.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":43148830638332,"sku":"92156A-8","price":3547.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/92156A-Photoroom.png?v=1774219245"},{"product_id":"4-function-lodar-standard-wireless-electric-actuator-system-9-series","title":"4 Function Lodar Standard Wireless Electric Actuator System | 9 Series FET","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless electric actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the electric actuator drivers built into the box, coded together and ready to wire to your equipment. Operates 4 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Lodar Standard Wireless Electric Actuator System (92154A-8) gives you 4-function wireless control with a 200 ft (61 m) range on the 418 MHz band. The receiver drives electric linear actuators directly from its outputs - no separate valve bank.  It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck your valve linkage before ordering.\u003c\/strong\u003e The electric actuators bolt onto the solid control rods your valve levers connect to, so you need clearance to mount them. A system with actuators included works only with solid \"bang-bang\" valve rods - not with valves operated by flexible cables or cords. If your valves are cable-operated, contact us.\u003c\/p\u003e\n\u003cp\u003eElectric actuators are a good fit for trucks that do not have onboard air - they drive the valve linkage electrically instead of pneumatically.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 4 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003e4 functions = 2 double-acting valves, two directions each\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eElectric actuator receiver - drives linear actuators directly, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92154A-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 4-function Lodar system? Compare the \u003ca href=\"\/products\/4-function-lodar-ip-wireless-air-system-9-series\"\u003e4 Function Lodar IP Wireless Air System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-lodar-mini-wireless-system-11-series\"\u003e4 Function Lodar Mini Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e\n\u003cp\u003eCommon uses: Designed for hydraulic systems in towing, agriculture, and municipal service fleets.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":43148830671100,"sku":"92154A-8","price":2387.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/92154A-Photoroom.png?v=1774219241"},{"product_id":"4-function-pierce-wireless-transmitter","title":"4 Function Wireless Transmitter | PS Series","description":"\u003cp\u003e\u003cstrong\u003eReplacement transmitter for an existing PIERCE PS Series wireless system\u003c\/strong\u003e — a transmitter is the handheld unit and is not a standalone product. It pairs with a matching receiver on the same series and function count.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function PIERCE Mini Transmitter (PS004T) is the compact Mini handheld for a PIERCE PS Series system, sending 4 functions of control to the receiver on your equipment. It has a silicone rubber keypad, carries an IP 67 rating, runs on 2× AAA batteries, broadcasts on 433 MHz, and reaches a 150 ft (45 m) operating range.\u003c\/p\u003e\n\u003ch4\u003eWill this transmitter work with my receiver?\u003c\/h4\u003e\n\u003cp\u003eMatch three things: the series (PS Series), the function count (4), and the receiver it was coded to. Transmitters and receivers are paired on the same RF band, so replace a PS Series transmitter with a PS Series transmitter. If you are replacing a lost or damaged handset, confirm the receiver model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of control\u003c\/li\u003e\n\u003cli\u003eMini transmitter — silicone rubber keypad\u003c\/li\u003e\n\u003cli\u003eIP 67 rated, operates -22°F to 149°F (-30°C to 65°C)\u003c\/li\u003e\n\u003cli\u003ePowered by 2× AAA batteries\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range\u003c\/li\u003e\n\u003cli\u003e433 MHz fixed frequency, wide band\u003c\/li\u003e\n\u003cli\u003ePIERCE SKU PS004T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a replacement part — it goes on the 4-function PS Series wireless system. See the complete \u003ca href=\"\/products\/4-function-wireless-remote-control-system\"\u003e4 Function Wireless Remote Control System\u003c\/a\u003e. Pair it with the matching \u003ca href=\"\/products\/4-function-fet-receiver-ps-series\"\u003e4 Function receiver\u003c\/a\u003e on the same system.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":43481930891516,"sku":"PS004T","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/4_Function_Wireless_Remote_Transmitter.png?v=1774219385"},{"product_id":"2-function-lodar-standard-wireless-electric-actuator-system-9-series","title":"2 Function Lodar Standard Wireless Electric Actuator System | 9 Series FET","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless electric actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the electric actuator drivers built into the box, coded together and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Lodar Standard Wireless Electric Actuator System (92150A-8) gives you 2-function wireless control with a 200 ft (61 m) range on the 418 MHz band. The receiver drives electric linear actuators directly from its outputs - no separate valve bank.  This version has no master output. Choose a master-output model if you need an extra output that fires alongside every function - for example, an HPU that must run during a lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck your valve linkage before ordering.\u003c\/strong\u003e The electric actuators bolt onto the solid control rods your valve levers connect to, so you need clearance to mount them. A system with actuators included works only with solid \"bang-bang\" valve rods - not with valves operated by flexible cables or cords. If your valves are cable-operated, contact us.\u003c\/p\u003e\n\u003cp\u003eElectric actuators are a good fit for trucks that do not have onboard air - they drive the valve linkage electrically instead of pneumatically.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eElectric actuator receiver - drives linear actuators directly, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eNo master output\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92150A-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 2-function Lodar system? Compare the \u003ca href=\"\/products\/2-function-lodar-stainless-ip-wireless-system-9-series\"\u003e2 Function Lodar Stainless IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-lodar-standard-wireless-system-11-series-no-master\"\u003e2 Function Lodar Standard Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":43593626648828,"sku":"92150A-8","price":1274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/92150A-Photoroom.png?v=1774219237"},{"product_id":"2-function-lodar-direct-mount-air-system-jerr-dan-husco","title":"2 Function Lodar Direct-Mount Air System | Jerr-Dan Husco","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless air actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Lodar Direct-Mount Air System (92150DMJ-8) gives you 2-function wireless control with a 200 ft (61 m) range on the 433 MHz band. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly - there is no separate external valve bank. The cylinders mount directly to your valve spools. This version has no master output. Choose a master-output model if you need an extra output that fires alongside every function - for example, an HPU that must run during a lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts directly to your valves.\u003c\/strong\u003e This direct-mount system bolts onto the Husco spool valves on Jerr-Dan units - there are no separate actuators and no control-rod linkage. Confirm your valves are Husco before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir supply.\u003c\/strong\u003e The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eAir receiver - pneumatic solenoid valves built in, IP 67 rated\u003c\/li\u003e\n\u003cli\u003eDirect-mount to Husco spool valves - no separate actuators\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eNo master output\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92150DMJ-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 2-function Lodar system? Compare the \u003ca href=\"\/products\/2-function-lodar-stainless-ip-wireless-system-9-series\"\u003e2 Function Lodar Stainless IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-lodar-standard-wireless-system-11-series-no-master\"\u003e2 Function Lodar Standard Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":44284184723708,"sku":"92150DMJ-8","price":1190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_Wireless_Air_System_with_Bolt_on_Actuator_Husco.png?v=1774219114"},{"product_id":"2-function-lodar-direct-mount-air-system-miller-gresen","title":"2 Function Lodar Direct-Mount Air System | Miller Gresen","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless air actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Lodar Direct-Mount Air System (92150DMM-8) gives you 2-function wireless control with a 200 ft (61 m) range on the 433 MHz band. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly - there is no separate external valve bank. The cylinders mount directly to your valve spools. This version has no master output. Choose a master-output model if you need an extra output that fires alongside every function - for example, an HPU that must run during a lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts directly to your valves.\u003c\/strong\u003e This direct-mount system bolts onto the Gresen spool valves on Miller units - there are no separate actuators and no control-rod linkage. Confirm your valves are Gresen before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir supply.\u003c\/strong\u003e The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eAir receiver - pneumatic solenoid valves built in, IP 67 rated\u003c\/li\u003e\n\u003cli\u003eDirect-mount to Gresen spool valves - no separate actuators\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eNo master output\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92150DMM-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 2-function Lodar system? Compare the \u003ca href=\"\/products\/2-function-lodar-stainless-ip-wireless-system-9-series\"\u003e2 Function Lodar Stainless IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-lodar-standard-wireless-system-11-series-no-master\"\u003e2 Function Lodar Standard Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":44284184756476,"sku":"92150DMM-8","price":1040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_Wireless_Air_System_with_Bolt_on_Actuator_Gresen.png?v=1774219097"},{"product_id":"4-function-lodar-direct-mount-air-system-jerr-dan-husco","title":"4 Function Lodar Direct-Mount Air System | Jerr-Dan Husco","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless air actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 4 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Lodar Direct-Mount Air System (92154DMJ-8) gives you 4-function wireless control with a 200 ft (61 m) range on the 433 MHz band. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly - there is no separate external valve bank. The cylinders mount directly to your valve spools. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts directly to your valves.\u003c\/strong\u003e This direct-mount system bolts onto the Husco spool valves on Jerr-Dan units - there are no separate actuators and no control-rod linkage. Confirm your valves are Husco before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir supply.\u003c\/strong\u003e The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 4 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003e4 functions = 2 double-acting valves, two directions each\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eAir receiver - pneumatic solenoid valves built in, IP 67 rated\u003c\/li\u003e\n\u003cli\u003eDirect-mount to Husco spool valves - no separate actuators\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92154DMJ-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 4-function Lodar system? Compare the \u003ca href=\"\/products\/4-function-lodar-ip-wireless-air-system-9-series\"\u003e4 Function Lodar IP Wireless Air System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-lodar-mini-wireless-system-11-series\"\u003e4 Function Lodar Mini Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e\n\u003cp\u003eCommon uses: Jerr-Dan and other Husco-equipped wreckers, service trucks, and utility rigs.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":44284184822012,"sku":"92154DMJ-8","price":2721.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/4_Function_Wireless_Air_System_with_Bolt_on_Actuator_Husco.png?v=1774219090"},{"product_id":"4-function-lodar-direct-mount-air-system-miller-gresen","title":"4 Function Lodar Direct-Mount Air System | Miller Gresen","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless air actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 4 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Lodar Direct-Mount Air System (92154DMM-8) gives you 4-function wireless control with a 200 ft (61 m) range on the 433 MHz band. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly - there is no separate external valve bank. The cylinders mount directly to your valve spools. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts directly to your valves.\u003c\/strong\u003e This direct-mount system bolts onto the Gresen spool valves on Miller units - there are no separate actuators and no control-rod linkage. Confirm your valves are Gresen before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir supply.\u003c\/strong\u003e The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 4 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003e4 functions = 2 double-acting valves, two directions each\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eAir receiver - pneumatic solenoid valves built in, IP 67 rated\u003c\/li\u003e\n\u003cli\u003eDirect-mount to Gresen spool valves - no separate actuators\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92154DMM-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 4-function Lodar system? Compare the \u003ca href=\"\/products\/4-function-lodar-ip-wireless-air-system-9-series\"\u003e4 Function Lodar IP Wireless Air System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-lodar-mini-wireless-system-11-series\"\u003e4 Function Lodar Mini Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e\n\u003cp\u003eCommon uses: Compact hydraulic circuits on tow, utility, and ag equipment using Gresen valves.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":44284184854780,"sku":"92154DMM-8","price":1738.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/4_Function_Wireless_Air_System_with_Bolt_on_Actuator_Gresen.png?v=1774219086"},{"product_id":"6-function-lodar-direct-mount-air-system-jerr-dan-husco","title":"6 Function Lodar Direct-Mount Air System | Jerr-Dan Husco","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless air actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 6 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 6 Function Lodar Direct-Mount Air System (92156DMJ-8) gives you 6-function wireless control with a 200 ft (61 m) range on the 433 MHz band. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly - there is no separate external valve bank. The cylinders mount directly to your valve spools. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts directly to your valves.\u003c\/strong\u003e This direct-mount system bolts onto the Husco spool valves on Jerr-Dan units - there are no separate actuators and no control-rod linkage. Confirm your valves are Husco before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir supply.\u003c\/strong\u003e The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 6 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 functions of wireless control\u003c\/li\u003e\n\u003cli\u003e6 functions = 3 double-acting valves, two directions each\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eAir receiver - pneumatic solenoid valves built in, IP 67 rated\u003c\/li\u003e\n\u003cli\u003eDirect-mount to Husco spool valves - no separate actuators\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92156DMJ-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 6-function Lodar system? Compare the \u003ca href=\"\/products\/6-function-lodar-stainless-ip-wireless-system-9-series\"\u003e6 Function Lodar Stainless IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/6-function-lodar-standard-wireless-air-system-9-series\"\u003e6 Function Lodar Standard Wireless Air System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e\n\u003cp\u003eCommon uses: Jerr-Dan and other Husco-equipped wreckers, service rigs, and utility trucks.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":44284184887548,"sku":"92156DMJ-8","price":2985.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/6_Function_Wireless_Air_System_with_Bolt_on_Actuator_Husco.png?v=1774219110"},{"product_id":"6-function-lodar-direct-mount-air-system-miller-gresen","title":"6 Function Lodar Direct-Mount Air System | Miller Gresen","description":"\u003cp\u003e\u003cstrong\u003eComplete wireless air actuator control system\u003c\/strong\u003e - includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 6 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 6 Function Lodar Direct-Mount Air System (92156DMM-8) gives you 6-function wireless control with a 200 ft (61 m) range on the 433 MHz band. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly - there is no separate external valve bank. The cylinders mount directly to your valve spools. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts directly to your valves.\u003c\/strong\u003e This direct-mount system bolts onto the Gresen spool valves on Miller units - there are no separate actuators and no control-rod linkage. Confirm your valves are Gresen before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir supply.\u003c\/strong\u003e The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 6 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 functions of wireless control\u003c\/li\u003e\n\u003cli\u003e6 functions = 3 double-acting valves, two directions each\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eAir receiver - pneumatic solenoid valves built in, IP 67 rated\u003c\/li\u003e\n\u003cli\u003eDirect-mount to Gresen spool valves - no separate actuators\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e200 ft (61 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92156DMM-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 6-function Lodar system? Compare the \u003ca href=\"\/products\/6-function-lodar-stainless-ip-wireless-system-9-series\"\u003e6 Function Lodar Stainless IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/6-function-lodar-standard-wireless-air-system-9-series\"\u003e6 Function Lodar Standard Wireless Air System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e\n\u003cp\u003eCommon uses: Tow \u0026amp; recovery, utility bodies, ag equipment, and municipal fleets using Gresen valve banks.\u003c\/p\u003e","brand":"PIERCE","offers":[{"title":"Default Title","offer_id":44284185018620,"sku":"92156DMM-8","price":2497.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/6_Function_Wireless_Air_System_with_Bolt_on_Actuator_Gresen.png?v=1774219093"},{"product_id":"4-function-lodar-standard-wireless-system-9-series-fet-keypad","title":"4 Function Lodar Standard Wireless System | 9 Series FET | Keypad","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the Standard handheld transmitter and the FET receiver, coded together at the factory and ready to wire to your equipment. Operates 4 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Lodar Standard Wireless System (92104K-8) gives you 4-function wireless control with a 150 ft (45 m) range on the 418 MHz band. Dc fet output switching, 10 A per output, 12\/24V DC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eWhat does the keypad receiver add?\u003c\/h4\u003e\u003cp\u003eThe keypad receiver lets you operate the 4 functions directly at the receiver with a built-in keypad, as a backup to the wireless handset. Confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eFET receiver - DC output switching, 10 A per output, 12\/24V DC, wide band, IP 65 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eKeypad receiver - operate functions at the receiver as a wired backup\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92104K-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 4-function Lodar system? Compare the \u003ca href=\"\/products\/4-function-lodar-ip-wireless-air-system-9-series\"\u003e4 Function Lodar IP Wireless Air System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-lodar-mini-wireless-system-11-series\"\u003e4 Function Lodar Mini Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":44284185182460,"sku":"92104K-8","price":1063.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/4_Function_Standard_Wireless_Control_System_92_Series_FET_Keypad_Receiver.png?v=1774219049"},{"product_id":"2-function-lodar-standard-wireless-system-9-series-relay","title":"2 Function Lodar Standard Wireless System | 9 Series Relay","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the Standard handheld transmitter and the Relay receiver, coded together at the factory and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Lodar Standard Wireless System (90102) gives you 2-function wireless control with a 150 ft (45 m) range on the 433 MHz band. Dc mechanical-relay output switching, 5 A per output, 12\/24V DC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 12\/24V DC. The relay receiver switches up to 5 A per output. If your functions draw more than 5 A, choose the FET version, which handles 10 A. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eRelay receiver - DC mechanical relays, 5 A per output, 12\/24V DC, IP 65 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 90102\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 2-function Lodar system? Compare the \u003ca href=\"\/products\/2-function-lodar-mini-wireless-system-9-series-keypad-relay-no-master\"\u003e2 Function Lodar Mini Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-lodar-stainless-ip-wireless-system-9-series\"\u003e2 Function Lodar Stainless IP Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":46587505901820,"sku":"90102","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_Standard_Wireless_Control_System_90_Series_Relay_Receiver.png?v=1774218955"},{"product_id":"2-function-lodar-standard-110v-wireless-system-9-series-no-master","title":"2 Function Lodar Standard Wireless System | 9 Series 110V | No Master","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the Standard handheld transmitter and the 110V receiver, coded together at the factory and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Lodar Standard Wireless System (96100-8) gives you 2-function wireless control with a 150 ft (45 m) range on the 418 MHz band. Mechanical-relay output switching, 10 A per output, 110\/220V AC. This version has no master output. Choose a master-output model if you need an extra output that fires alongside every function - for example, an HPU that must run during a lift.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 110\/220V AC. The relay receiver switches up to 10 A per output at 110\/220V AC, so this system runs off AC mains rather than a 12V battery. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003e110V receiver - mechanical relays, 10 A per output, 110\/220V AC (90-264 VAC), IP 67 rated\u003c\/li\u003e\n\u003cli\u003e110\/220V AC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eNo master output\u003c\/li\u003e\n\u003cli\u003eLodar SKU 96100-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003e⚠️ 110V installation requires a certified electrician. Confirm circuit amperage, grounding, and overcurrent protection before energizing.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 2-function Lodar system? Compare the \u003ca href=\"\/products\/2-function-lodar-ip-110v-wireless-system-9-series\"\u003e2 Function Lodar IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-lodar-stainless-ip-wireless-system-9-series\"\u003e2 Function Lodar Stainless IP Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":46623843483900,"sku":"96100-8","price":604.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_110V_Standard_Wireless_Control_System_96_Series_Relay_Receiver_No_Master_Output.png?v=1774218924"},{"product_id":"2-function-lodar-standard-110v-wireless-system-9-series","title":"2 Function Lodar Standard Wireless System | 9 Series 110V","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the Standard handheld transmitter and the 110V receiver, coded together at the factory and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 2 Function Lodar Standard Wireless System (96102-8) gives you 2-function wireless control with a 150 ft (45 m) range on the 418 MHz band. Mechanical-relay output switching, 10 A per output, 110\/220V AC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 2 here - and confirm your power supply: this system runs on 110\/220V AC. The relay receiver switches up to 10 A per output at 110\/220V AC, so this system runs off AC mains rather than a 12V battery. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003e110V receiver - mechanical relays, 10 A per output, 110\/220V AC (90-264 VAC), IP 67 rated\u003c\/li\u003e\n\u003cli\u003e110\/220V AC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 96102-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003e⚠️ 110V installation requires a certified electrician. Confirm circuit amperage, grounding, and overcurrent protection before energizing.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 2-function Lodar system? Compare the \u003ca href=\"\/products\/2-function-lodar-ip-110v-wireless-system-9-series\"\u003e2 Function Lodar IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-lodar-stainless-ip-wireless-system-9-series\"\u003e2 Function Lodar Stainless IP Wireless System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":46623843516668,"sku":"96102-8","price":548.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/2_Function_110V_Standard_Wireless_Control_System_96_Series_Relay_Receiver.png?v=1774218926"},{"product_id":"4-function-lodar-standard-110v-wireless-system-9-series","title":"4 Function Lodar Standard Wireless System | 9 Series 110V","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the Standard handheld transmitter and the 110V receiver, coded together at the factory and ready to wire to your equipment. Operates 4 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Lodar Standard Wireless System (96104-8) gives you 4-function wireless control with a 150 ft (45 m) range on the 418 MHz band. Mechanical-relay output switching, 10 A per output, 110\/220V AC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 4 here - and confirm your power supply: this system runs on 110\/220V AC. The relay receiver switches up to 10 A per output at 110\/220V AC, so this system runs off AC mains rather than a 12V battery. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003e110V receiver - mechanical relays, 10 A per output, 110\/220V AC (90-264 VAC), IP 67 rated\u003c\/li\u003e\n\u003cli\u003e110\/220V AC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 96104-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003e⚠️ 110V installation requires a certified electrician. Confirm circuit amperage, grounding, and overcurrent protection before energizing.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 4-function Lodar system? Compare the \u003ca href=\"\/products\/4-function-lodar-ip-110v-wireless-system-9-series\"\u003e4 Function Lodar IP Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/4-function-lodar-standard-wireless-air-system-9-series\"\u003e4 Function Lodar Standard Wireless Air System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":46623843614972,"sku":"96104-8","price":694.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/4_Function_Standard_110V_Wireless_Control_System_96_Series_110V_Relay_Receiver.png?v=1774219005"},{"product_id":"4-function-roll-off-wireless-control-system-ps","title":"4 Function Roll-Off Wireless Control System | PS Series","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the handheld transmitter and the receiver, coded together at the factory and ready to wire to your equipment. Operates 4 functions.\u003c\/p\u003e\n\u003cp\u003eThe 4 Function Roll-Off Wireless Control System (PS004B) gives you 4-function wireless control with a 150 ft (45 m) range on the 433 MHz band. Dc fet output switching, 3 A per output, 12\/24V DC. This system ships with roll-off trailer firmware for a winch and hydraulic pump option. Its master output is active only on the hydraulic pump functions (F3 and F4), not on every function.\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 4 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 3 A per output, with 5 A overload auto-shutdown to protect the circuit. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eHandheld transmitter - IP 67 rated\u003c\/li\u003e\n\u003cli\u003eFET receiver - DC output switching, 3 A per output (5 A overload auto-shutdown), 12\/24V DC, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 433 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - active only on hydraulic pump functions F3 \u0026amp; F4 (roll-off firmware)\u003c\/li\u003e\n\u003cli\u003ePIERCE SKU PS004B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther PIERCE wireless systems: the \u003ca href=\"\/products\/4-function-wireless-remote-control-system\"\u003ePS004 4 Function Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-wireless-remote-control-system\"\u003ePS002 2 Function Wireless System\u003c\/a\u003e or \u003ca href=\"\/products\/2-function-wireless-trailer-system\"\u003ePS002TS 2 Function Dump Trailer System\u003c\/a\u003e. Replacement transmitters and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":46697025110268,"sku":"PS004B","price":412.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/PS004B_b170977e-fb7b-41fa-9f69-1e8f194f04c4.png?v=1774223629"},{"product_id":"8-function-lodar-standard-wireless-system-9-series-fet","title":"8 Function Lodar Standard Wireless System | 9 Series FET","description":"\u003cp\u003e\u003cstrong\u003eComplete plug-and-play wireless control system\u003c\/strong\u003e - includes the Standard handheld transmitter and the FET receiver, coded together at the factory and ready to wire to your equipment. Operates 8 functions on the Lodar 9 Series.\u003c\/p\u003e\n\u003cp\u003eThe 8 Function Lodar Standard Wireless System (92108-8) gives you 8-function wireless control with a 150 ft (45 m) range on the 418 MHz band. Dc fet output switching, 10 A per output, 12\/24V DC. It includes a master output - an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).\u003c\/p\u003e\n\u003ch4\u003eHow do I know this system fits my equipment?\u003c\/h4\u003e\u003cp\u003eMatch the function count to the number of outputs you need to operate - 8 here - and confirm your power supply: this system runs on 12\/24V DC. The FET receiver switches up to 10 A per output. Choose it when your functions draw more than the 5 A a relay receiver handles. The transmitter and receiver ship coded to each other, so the system works out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 functions of wireless control\u003c\/li\u003e\n\u003cli\u003eStandard transmitter - IP 54 rated\u003c\/li\u003e\n\u003cli\u003eFET receiver - DC output switching, 10 A per output, 12\/24V DC, wide band, IP 67 rated\u003c\/li\u003e\n\u003cli\u003e12\/24V DC operating voltage\u003c\/li\u003e\n\u003cli\u003e150 ft (45 m) operating range, 418 MHz band\u003c\/li\u003e\n\u003cli\u003eMaster output - fires on every function for run-along equipment\u003c\/li\u003e\n\u003cli\u003eLodar SKU 92108-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.\u003c\/p\u003e\n\u003cp\u003eWant a different form of the same 8-function Lodar system? Compare the \u003ca href=\"\/products\/8-function-lodar-ip-wireless-air-system-9-series\"\u003e8 Function Lodar IP Wireless Air System\u003c\/a\u003e or \u003ca href=\"\/products\/8-function-lodar-direct-mount-air-system-miller-gresen\"\u003e8 Function Lodar Direct-Mount Air System\u003c\/a\u003e. Replacement handsets and receivers are sold separately.\u003c\/p\u003e","brand":"Lodar LTD","offers":[{"title":"Default Title","offer_id":47285260517628,"sku":"92108-8","price":1562.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/files\/92108-Photoroom.png?v=1774222023"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/6276\/5820\/collections\/PS002_in_operation_ff51c042-a90a-4f12-b09f-289710141d8e.webp?v=1774215383","url":"https:\/\/www.piercearrowinc.com\/collections\/wireless-series.oembed","provider":"PIERCE ","version":"1.0","type":"link"}