How to Install and Operate your LED Spotlight

by Anthony Fairchild on 4/7/17 11:29 AM

PIERCE LED SpotlightRead on for step by step instructions to install, mount, pair the remote, and operate the PIERCE LED remote wireless spotlight.INSTALLATION:

Step 1:  Remove from the box.

Step 2:  Route the cord to a convenient place.

Step 3:  Plug into a 12V power outlet.

Step 4: Turn on the spotlight using the wireless remote.

HARD MOUNTING:

Hard mount the LED spotlight using the 6” x 6” pre-installed square mount and included screws.

PAIRING THE CONTROL TO THE SPOTLIGHT:

The remote control works before coding; however, we suggest pairing the control to the spotlight before use in order to avoid disturbance from other remote controls.

Step 1: Connect the spotlight to a 12-14V direct current. The spotlight will flash once to signal there is a connection.

Step 2: Press the On/Off button on the spotlight for 15 seconds or until the light flashes 3 times in succession (long flash).

Step 3: Again, press the On/Off button on the remote control for 15 seconds or until the light flashes 3 times in succession (long flash). The spotlight is now paired to the control.

NOTE: Please code the spotlight first and the remote control after, so that coding on replacement control will take place of the original controller directly.

NOTE: In the event you misplace your control, please press the On/Off button on the remote control for 15 seconds to pair the replacement.

UNPAIR THE CONTROL AND SPOTLIGHT:

Step 1: Press the On/Off button on the remote control for 15 seconds while the spotlight is plugged in. Wait until the light flashes 3 times in succession (short flash), it lifts code successfully.

Step 2: Press the On/Off button on the spotlight for 15 seconds or until the light flashes 3 times in succession (short flash). The control is now unpaired.

OPERATE REMOTE USAGE:

A 9V battery is used in the remote and included with the spotlight. 

Please note: if the PIERCE spotlight is left on, it will drain your battery.

OFF/ON: Press once to turn the light on. Press again to turn the light off.

SOS: Signal the international SOS pattern.

UP: Press continuously to go up.

DOWN: Press continuously to go down.

LEFT: Press continuously to go left.

RIGHT: Press continuously to go right.

More questions on spotlight installation? Already own the LED spotlight? Register your product to receive the manual, spec sheet, and more to your inbox. Get product updates and maintenance information. Click below to register your PIERCE product. 

PRODUCT INFO >> DELIVERED. Click for product docs and news.

Looking for more?

The Pierce Arrow product catalog is chock full of info, FAQs and specs. Get yours by clicking below.

Send Me A Catalog.

Return To Articles

Sign Up for Pierce Updates

Recent Posts

New Call-to-action
pierce arrow
author avatar

This post was written by Anthony Fairchild

I'm the technical service manager at Pierce.